Points to CSV Command

D_PointsToCSV_600ppi   Points to CSV

Command Licensing and Default Menu Location

  • The Points to CSV command is part of the RPS Modeling Toolbox
  • The command is located on the Modeling toolbox menu ribbon
  • The command is located in the Reports menu group

Command Description

Creates a CSV output that reports a selection of points and compares them to a surface and optional alignment and incorporates the points description, layer, point name and attribute information. The cut and fill between the points and surface is also reported.

Command Interface Description

The Points to CSV command dialog looks as follows

Select the points that you wish to report

Reference surface:
Select the surface that you wish to use as the height reference for Cut/Fill values

Select the alignment that you wish to use for Station and Offset reference. Note that currently the alignment must be a 3D alignment i.e. it requires both a Horizontal and Vertical alignment element

Report item checkboxes:
Check the checkbox beside each of the listed items that you wish to report. The options are

  • Feature Code
  • Description 1
  • Description 2
  • Media File Name
  • Layer Name

File name:
Enter the file name for the csv file that will be created. The file will be saved to the project folder for the project.

Executes the command, generates the report and closes on completion

Closes the command without further execution.

Video Demonstration

The following video shows how to utilize the Points to CSV command

Use Case Videos

The following videos show the use of the Points to CSV command in a work process context

Feedback and Enhancement Requests

If you would like to provide feedback on the use of the Points to CSV command or to request enhancements or improvements to the command please Click Here